|
DO IT
YOURSELF APPLICATION INSTRUCTIONS
for Vinyl Graphics & Letters
Please note:
Your decals are covered
with a protective masking
which will be removed
after application. This holds the graphics in
place. It also gives the
decals more body, keeping them from
tearing, folding, getting
scratched, etc.
Please read instructions completely
before starting application.
Clean the surface where you are applying decal. Window cleaner or an ammonia based
cleaner works best, as it will leave little residue. Brush off any lint.
1. Carefully
remove stiff backing paper from the decal, making sure not to touch the back of
the decal to itself.
2 (a). You may apply
dry (recommended
on smaller graphics), but be sure to position on first
try, there
will be no adjusting once attached, then go to Step 3 OR
(b). Lightly wet the back
of the decal by misting with water at 99% water/1% dishsoap mixture.
(Soap mixture gives you a little more play in movement.) Do not use an alcohol
or ammonia based product, as it will compromise the adhesive. Holding the
decal by the left and right sides, and keeping
the decal
flat, place the decal against the
surface.
The water will keep the decal from sticking
right away, to give you time to get the
placement
right. Once
the decal is where you want it, carefully and firmly
push the water out with squeegee.
Let dry.
3. A credit card will also work nicely as a squeegee.
4. Remove top masking paper and you are done!
|
Tell a Friend